AFX MAGNA-TRAC
BODIES
STOCK , RESIN OR INJECTION MOLDED
AFX , TOMY , DASH , ECT...
MAY BE LIGHTENED
MAY BE LOWERED MUST RETAIN ORIGINAL APPEARANCE
MUST HAVE BUMPERS , WINDOWS , DRIVERS AND ROLL BAR AS
ORIGINALLY MANUFACTURED
NO LEXAN BODIES OR ONE OFF BODIES
THIS SERIES WE WILL RUN GROUP 9 LATE MODEL AND HISTORIC
STOCK CARS AND TRANS-AM
RACERS WILL HAVE NOTICE OF WHAT BODY PRIOR TO RACE
MORE MAY BE ADDED LATER
CHASSIS
CHASSIS BE STOCK AFX MAGNA-TRACTION OR X TRACTION
NO BEARINGS OR BUSHINGS
NO WEIGHTS OR HANDLING PANS
CHASSIS MAY NOT BE CUT , SANDED OR DRILLED IN ANY WAY
ANY PICK-UP SHOE AND SPRINGS
NO SPEED STEER SHOES
PICK UP SHOES MAY BE BENT TO ALLOW FOR BETTER CONTACT
PICK-UP SHOE MAY NOT BE WEIGHTED
NO SHUNT WIRES ALLOWED
STEEL OR PLASTIC GUIDE PIN
GEAR PLATE CLAMP MAY NOT BE BENT OR DIMPLED
CAR MUST PASS EASILY THUR 1-5/16 TECH BLOCK
MAGNETS
NO POLYMER OR NEOS
MAGNET MAY BE SHIMMED WITH NON-METALIC MATRIAL(TAPE)
CHASSIS MAY NOT BE CUT
MAGNETS MAY NOT BE SANDED OR CUT
ARMATURES
ARMATURES MUST BE STOCK , 5.5 OHM MINIMUM
ARMATURES MAY BE BALANCED
ARMATURES MAY NOT BE REWOUND OR DE-WOUND
NO QUAD LAMS
COMMUTATOR BRUSHES
ANY CARBON BASED BRUSHES STOCK , JB , WIZARD
NO SILVER BRUSHES
GEARS
ARMATURE PINION , IDLER AND DRIVEN GEARS MUST BE STOCK OR
STOCK REPLACEMENTS
NO LIGHTENED OR MODIFIED GEARS (DRILLED)
GEARS MAY BE SOLDERED OR GLUE TO THERE SHAFTS
GEARS MAY BE POLISHED OR LAPPED
GEARS MAY NOT BE BEVELED
DRIVEN GEAR RIVET MAY BE REPLACED WITH A SCREW
CLUSTER GEAR MUST REMAIN STOCK
WHEEL-TIRE-AXLES
ANY FRONT WHEEL AND TIRE MAY BE USED
ANY REAR WHEEL MAY BE USED
SLIP ON REAR TIRE MAY BE USED
NO SPONGE SILICONE
X-TRACTION CENTER HUMP MAY BE SANDED
